Iron-on adhesive tape – Repair tears & hems in 10 seconds

The hem is open again – and the iron is already ready.

Pants with an undone hem, jeans with a rip at the knee, the frayed jacket cuff – all these end up in the repair pile that never gets smaller. The SwiftPatch™ iron-on tape is a heat-activated polyamide mesh fabric that permanently bonds fabrics together: cut strips, position, press with a hot iron for about 10 seconds – done. No sewing kit, no glue, no waiting at the tailor.

Advantages

• No more undone hems: The repair pile with pants, kids’ jeans, and curtains disappears because every repair is done in the time it takes for the kettle to boil – no needle, no thread, no prior knowledge needed.
• No rework after washing: The polyamide mesh melts into the fibers of both fabric layers during ironing, making the bond machine-wash resistant – glue peels off, this bond does not.
• No stiff patch feeling on the skin: The mesh fabric made of polyamide and nylon fuses within the fibers instead of lying on top, so the repaired spot remains as soft and flexible as the original fabric.

Specifications

• Material: Polyamide (PA) and nylon mesh fabric
• Colors: White, Black
• Contents: 2 rolls of SwiftPatch™ iron-on tape
• Width options: 1.0 cm / 1.5 cm / 2.0 cm / 2.5 cm / 3.0 cm / 5.0 cm
• Application method: Heat activation with iron (~10 seconds)

Application

1. Cut: Cut a strip of SwiftPatch™ slightly larger than the tear or hem – select the appropriate width depending on the repair spot.
2. Position: Place the mesh tape between the two fabric layers or slide under the folded hem and smooth it out.
3. Iron: Slowly glide a hot iron over the area for about 10 seconds – lift the iron, the bond is permanently sealed.

Pro tip: For very thick fabrics like denim, use the iron at the highest setting without steam and extend the 10 seconds calmly to 15 seconds – this allows the mesh to fully melt into both layers, ensuring the bond remains reliable even after frequent washing at 40 °C.