Double stainless steel water tap with 2 outlets

Change the hose while the garden waits – and both tasks remain half done.

You stand at the faucet, the garden hose is connected, but the car urgently needs water – so you stop everything, switch connections, start over. With the double stainless steel faucet, you can connect two hoses simultaneously and operate each outlet separately via independent levers. Watering the garden and washing the car run in parallel without you having to move once. The result: all outdoor work done in half the time, without interruption.

Benefits

• No more annoying switching: Because both outlets are active at the same time, the constant interrupting, unscrewing, and switching between two tasks is completely eliminated.
• No lost time running back and forth: Since each outlet is individually controllable via its own lever, you can operate both water circuits from the same location – no extra steps needed.
• No worries about leaking connections: Thanks to the sealed valve insert and tightly screwed threads, you don’t need to regularly check connection points for leaks – the water pressure remains stable and constant.

Specifications

• Material: Stainless steel 304, levers made of zinc alloy
• Dimensions: 15 x 10 cm
• Input thread: 1/2" BSP male thread
• Output threads: 3/4" BSP female thread with 16-mm quick coupling
• Maximum pressure: 10 bar
• Temperature range: -20 to 80 °C
• Flow rate: Up to 30 l/min per outlet
• Scope of delivery: 1x double stainless steel fitting, 1x PTFE sealing tape, 2x rubber seals

Application

1. Connect: Screw the faucet with the 1/2" male thread onto your existing outdoor faucet – use the supplied PTFE sealing tape for a tight connection.
2. Insert hoses: Insert one hose each into the two 3/4" outlets with 16-mm quick coupling – both snap in securely.
3. Control: Open and close each outlet individually using its respective lever – both water circuits run independently of each other.

Pro tip: Wrap the PTFE sealing tape at least three times clockwise around the input thread before assembly – this ensures the connection stays permanently tight, even under high water pressure.