AquaGuard Pro Sealant Spray for Surfaces

The roof is dripping, the ceiling is turning brown – and the plumber is not coming until next week.

A slow drip at the pipe joint or a damp spot on the basement wall can quickly turn into an expensive damage. AquaGuard Pro combines resin and polyurethane into a flexible plastic layer that chemically bonds with the surface – on concrete, PVC, metal, wood, brick, and painted masonry. Within 24 hours the area is completely waterproof, without having to call a craftsman.

Benefits

• No further water damage: The brown ceiling stain stops growing because the sealant penetrates directly into the crack and does not chip off during the next frost or rain shower.
• No more organizing tradesmen appointments: Apply, let dry, done – three steps without tools, primer or compressor, so the evening stays free.
• No more doubts whether the sealing holds in winter: The cured layer expands and contracts with the substrate at temperature fluctuations from -20 °C to +80 °C (-4 °F to +176 °F), instead of cracking at the edges like rubber sprays.

Specifications

• Contents: 100 ml / 3.53 fl oz
• Package includes: Can + 9.8 cm application brush
• Drying time: 2–4 hours touch dry, fully cured after 24 hours
• Temperature resistance: -20 °C to +80 °C (-4 °F to +176 °F)
• Surfaces: Metal, wood, concrete, PVC, brick, painted masonry
• Formula: Resin + polyurethane + hardener

Application

1. Prepare: Clean the leak area and dry it as much as possible – dust and moisture prevent adhesion.
2. Apply: Shake the can vigorously for 30 seconds, spray evenly onto the crack and with wider joints work in with the included brush.
3. Let cure: Leave the area untouched for 24 hours – then fully waterproof and load-bearing.

Pro tip: For active dripping spots, first wipe the area as dry as possible with a cloth, then spray immediately and use the brush to press the material deep into the gap – this significantly speeds up the initial sealing.